Materials Needed For the 1:48 Scale Halloween Arm Chair and Coffee Table
Sample (not to scale) of a printable parts sheet for a 1:48 scale table and chair.
Photo copyright 2010 Lesley Shepherd, Licensed to About.com Inc.
To Make the 1:48 Scale Armchair and Coffee Table You Will Need:
Printable Parts or Template - This is a printable pdf (Acrobat Reader required) file which prints out on a single sheet of letter or A4 sized paper. You should use standard printing paper for this project. If you prefer you can use the printable parts as a template for making the furniture from other patterned or plain papers, or thin fabrics. If you use fabric or tissue, you will have to modify the thickness of the 'fillings' with either more or less material. Make one test run using the template to see how your material will work for the project.
PVA (White) Glue or Acid Free Glue Stick - use an acid free glue if possible.
Bone Folder - or plastic ruler to help fold the paper sections.
Fine Bent Nosed Tweezers
Scrap of Clear Rigid Plastic or Acetate for the 'glass' table top. I used a two inch square piece from the recyclable container for a piece of cake.