1. Home

Discuss in my forum

Make Printable Stone Towers and Cottages For a Glitter Village


6 of 9

Fit the Chimney to the Exterior Cottage Wall
Fitting a chimney to the exterior of a 1:144 scale printable

The exterior chimney is glued to the end wall of the 'stone' cottage before the walls are assembled or glittered.

Photo © 2013 Lesley Shepherd

Once the chimney has been assembled and allowed to dry, you can apply glue to the tabs on the back of the chimney and glue it to one of the end walls of the cottage. The chimney stack will stick up above the peak of the roof.

With the chimney in place, you can lay  your cottage walls flat and glitter them (and the chimney) if you wish.


©2014 About.com. All rights reserved.