Make the Pot Handle
- Cut out the handle. Cut the central portion free.
- Hold a pair of tweezer blades along the central pointed edge of the handle as far as the cutout in the center and fold the top section of the handle on either side of the pointed tab. Fold the pointed end of the handle in half so the lower sides touch each other.
- Turn the pointed tab to face down the handle. Apply glue to the edges of the pointed tab and glue it inside the handle's upper edges. Set aside to dry.
- When the top section has dried, apply glue to the insides of the lower handle and glue the edges together. Set aside to dry. (See photo this page.)
- When dry, use a black marker or black paint to cover any white paper edges that show.
- Glue the flat portion of the handle to the top back section of the pot along the seam line at the back. Glue the pointed end of the handle towards the base of the pot. Set aside to dry.
